BodyTite is a minimally-invasive device for body contouring delivering results previously only achieved through excisional procedures. BodyTite is powered by directional RF resulting in three-dimensional tissue remodeling through fat coagulation and volumetric heating. The coagulation of fat using RF-induced heat results in radio-frequency assisted lipolysis (RFAL).
RFAL technology represents the future of body and face contouring. By adding BodyTite,FaceTite, AccuTite and Morpheus8 to your aesthetic offerings, your practice will:
FaceTite is a complete contouring solution for the face and small areas of the body. The Facetite technology allows physicians to achieve results similar to a facelift or brachioplasty without excisional surgery.
SPECIFICATIONS
| Cannula Length: 1 Sensor 2 Sensors |
10 cm 10 cm |
| Cannula Diameter: 1 Sensor 2 Sensors |
1.8 mm 1.3 mm |
| Depth of Treatment: | Up to 25 mm (1”) |
| Internal Temperature: | Operator adjustable between 50°C - 70°C |
| External Temperature: | Operator adjustable up to 43°C |
| Output Frequency: | 1 MHz |
NeckTite is a minimally invasive handpiece for the remodeling and contouring of the neck and small body areas. The handpiece comprises an internal electrode located at the proximal end of a silicon-coated cannula which is introduced into the fat layer, while the external electrode lies over the skin has sensors for contact, impedance, and surface temperature. RF is travelling between the two electrodes with a simultaneous aspiration, resulting in gentle fat removal in addition to contouring and tightening.
SPECIFICATIONS
| Cannula Length: | 12 cm |
| Cannula Diameter: | 2.4 mm |
| Depth of Treatment: | Face - 3-25mm \ Body - 5-50mm |
| External Temperature: | Operator adjustable up to 43°C |
| Output Frequency: | 1 MHz+ |
BodyTite provides superior internal and external lipolysis, delivering body results previously only achieved through more extensive excisional surgical procedures. Powered by RFAL (Radio-Frequency Assisted Lipolysis), BodyTite provides unprecedented three-dimensional contraction of the dermis, subdermal connective tissue matrix and deep fat.
It works by delivering rapid and uniform bi-polar heating of the entire soft tissue matrix. Built-in safeguards including real time measurements of skin temperature, impedance monitoring, power cut-off and audible feedback help ensure patient safety.
SPECIFICATIONS
| Cannula Length: 1 Sensor 2 Sensors |
25cm /17 cm 17 cm |
| Cannula Diameter: 1 Sensor 2 Sensors |
5 mm/ 3.9 mm 2.2 mm |
| Depth of Treatment: | Up to 50 mm |
| Internal Temperature: | Operator adjustable between 50°C - 70°C |
| External Temperature: | Operator adjustable up to 43°C |
| Output Frequency: | 1 MHz+ |
THE DEEPEST SUBDERMAL FRACTIONAL TECHNOLOGY – FRACTIONAL REMODELING AND CONTOURING AT ITS BEST
SIMULTANEOUSLY, DIRECTIONAL RF ENERGY
SPECIFICATIONS
| Type of treatment: | Dermal & Sub-dermal |
| No Pins | Coated 24 |
| Pin length | Up to 4mm, programmable |
| Periorbital | 2mm |
| Face | 3mm |
| Body | 4mm |
| Ablation depth | Up to 4mm |
| Heating depth | Up to 6mm |
| Max Energy: | 62 mJ/pin at 75 W |
| Frequency: | 1 MHz |
| Repetition Rate: | Up to 2 pps |
CONTACT US
back to top